A NOTE FROM LARRY

 SPRING WELLNESS CHECK-UP

Check and document refrigerant (pressures, superheat & subcooling)

Check and document electrical (volts & amps, capacitance and voltage drop across contactor)

Check all electrical connections and terminals for tightness and corrosion

Check contactor for pitting and cleanliness

Check circuit boards for corrosion

Check and clean electrical enclosure

Check condenser fan motor, mounts & blade

Check refrigerant lines for rub/ contact points

Check pipe insulation

Check conduit seals

Clean leaves and dirt from condenser and rinse coil

Tighten case screws and check for overall appearance and stability

Check filter drier for rust

Check schraders and service valves for leaks

Check reversing valve (if applicable)

Brush and clean evaporator coil with no-rinse cleaner

Check condensate drain and condensate pump and treat with tablets

Check and document type of metering device

Check and document filter size and condition

Check for air leaks (R/A)

Check duct work & registers

Check safety switches

Check for mold

FALL WELLNESS CHECK-UP

Check and document electrical (volts & amps)

Check wiring connections and terminals

Check blower motor

Check induced draft motor

Check safety switches

Check flue

Check heat exchanger or heat strips

Check flame, flame sensor and igniter

Check for gas leaks

Check filter

Check refrigerant (heat pump only)

Check for cleanliness 

Save $50 on the "Down and Dirty Deep Clean" service

ALL THE BENEFITS OF E-GAP ESSENTIALS PLUS THE ADDITION OF:

A $150 credit per year towards repair of replacement of faulty electrical components of the registered system.

Save $50 on the "Down and Dirty Deep Clean" service.